Archive | stampmaker RSS feed for this section

Teresa Collins Stampmaker — Make your own Custom Stamps!! {tutorial and information on the giveaway}

1 Jul
Happy Friday!! 
I’d love to tell you about something really cool.

This was one of my favorite products I saw at the CHA show in February. 
You make custom stamps!!

{One of my goals this year is to share some of my favorite things. 
Here’s another one. 
More information on how to win a Stampmaker at the bottom of this post} 

If you are getting married, you can design a “save the date stamp”, you can make your own address stamps, or sweet would it be to make a stamp from your child’s artwork or handwriting? Or another cute idea would be to make a book plate stamp with your child’s name — the sky’s the limit!!! 

So when the the Stampmaker people contacted me and offered to send me a machine, I was so excited about the possibilities! I have just started to experiment with it, but seriously — it’s so easy to use.

The Stampmaker machine comes with artwork from Teresa Collins that is already done, as well as sheets that you can run through your ink jet printer and make your own stamps. 
I made a little plaque for my little puppy!  
She is the queen of the house, so I thought it was fitting to use the crown artwork that comes with the Stampmaker. 

Here’s a tutorial on how to use the Stampmaker: 


1. Plug the Stampmaker machine in. You need to let it warm up for a minute before you use it.


2. Open the Frame Clamps and insert one of the gel packs.

3. Then put your negative image artwork on top.

4. Shut the magnetic frame and put the frame inside the Stampmaker.

5. Leave it inside for THREE minutes — time it.

6. Take it out and cut the gel pack out of the plastic.

7. Scrub the excess gel off with soap and water.

8. Then put the stamp in the exposure tray and cover with a layer of water.

9. Put the tray inside the Stampmaker for TWO minutes. Time it.

10. Take it out and trim around the stamps. Then mount the stamps on the adhesive paper. Cut around that.

11. Mount the stamp on the acrylic stamp acrylic block.

Then use and enjoy! 

I also made my own stamp — the name of our puppy — TRIXIE. I designed the name in the software and then printed it off on the special negative film. You need to use an inkjet printer for this. Then I followed the rest of the steps to make the stamp.

I used Command hook to hang the little TRIXIE frame over her little dog bed. She loves it 🙂 

The possibilities are endless with this Stampmaker. Plus, check out the Photocentric blog where they have free image downloads so you can make even more stamps!! These are the free June downloads  — 
aren’t they cute?
 

And here are the free April downloads: 

I am so excited to use these stamps for some fun projects!!
And guess what??? 
Photocentric is giving a complete Teresa Collins Stampmaker kit away to a LUCKY Tatertots and Jello reader!!!  
Check back at the Weekend Wrap Up Party tonight where you can enter to win one of these fantastic machines. 
Here’s what it will come with: 

  • Stampmaker light unit
  • magnetic clamp
  • 5 x Large and 5 x Small
    stamp pacs
  • 2 x Emboss and 2 x Stencil pacs
  • acrylic block, small stamp
    border
  • rubber mat for emboss and stencil making
  • wash brush, post
    exposure tray
  • CD with the easy to use imagepac artwork modifying
    program and many exclusive Teresa Collins designs (ready to print)
  • 2 x
    sheets of negative film for inkjet printers
  • 2 x 4" x 3" sheets of
    Stampmaker Cling (for mounting stamp to acrylic block)
  • 8 pre printed
    samples of exclusive Teresa Collins designed artwork negatives plus
    written and video instructions

 And here’s Stampmaker video tutorial:
 

xoxo

PS — I am over at Sew Dang Cute today — sharing a Tube Top to Skirt refashion. Come on over and say hi!

PPSI can’t wait for tonight to see YOUR ideas!! I hope you will come link up to the Weekend Wrap Up Party — where I feature YOUR ideas!! The party starts at 6 pm MST.

Advertisements

Teresa Collins Stampmaker — Make your own Custom Stamps!! {tutorial and information on the giveaway}

1 Jul
Happy Friday!! 
I’d love to tell you about something really cool.

This was one of my favorite products I saw at the CHA show in February. 
You make custom stamps!!

{One of my goals this year is to share some of my favorite things. 
Here’s another one. 
More information on how to win a Stampmaker at the bottom of this post} 

If you are getting married, you can design a “save the date stamp”, you can make your own address stamps, or sweet would it be to make a stamp from your child’s artwork or handwriting? Or another cute idea would be to make a book plate stamp with your child’s name — the sky’s the limit!!! 

So when the the Stampmaker people contacted me and offered to send me a machine, I was so excited about the possibilities! I have just started to experiment with it, but seriously — it’s so easy to use.

The Stampmaker machine comes with artwork from Teresa Collins that is already done, as well as sheets that you can run through your ink jet printer and make your own stamps. 
I made a little plaque for my little puppy!  
She is the queen of the house, so I thought it was fitting to use the crown artwork that comes with the Stampmaker. 

Here’s a tutorial on how to use the Stampmaker: 


1. Plug the Stampmaker machine in. You need to let it warm up for a minute before you use it.


2. Open the Frame Clamps and insert one of the gel packs.

3. Then put your negative image artwork on top.

4. Shut the magnetic frame and put the frame inside the Stampmaker.

5. Leave it inside for THREE minutes — time it.

6. Take it out and cut the gel pack out of the plastic.

7. Scrub the excess gel off with soap and water.

8. Then put the stamp in the exposure tray and cover with a layer of water.

9. Put the tray inside the Stampmaker for TWO minutes. Time it.

10. Take it out and trim around the stamps. Then mount the stamps on the adhesive paper. Cut around that.

11. Mount the stamp on the acrylic stamp acrylic block.

Then use and enjoy! 

I also made my own stamp — the name of our puppy — TRIXIE. I designed the name in the software and then printed it off on the special negative film. You need to use an inkjet printer for this. Then I followed the rest of the steps to make the stamp.

I used Command hook to hang the little TRIXIE frame over her little dog bed. She loves it 🙂 

The possibilities are endless with this Stampmaker. Plus, check out the Photocentric blog where they have free image downloads so you can make even more stamps!! These are the free June downloads  — 
aren’t they cute?
 

And here are the free April downloads: 

I am so excited to use these stamps for some fun projects!!
And guess what??? 
Photocentric is giving a complete Teresa Collins Stampmaker kit away to a LUCKY Tatertots and Jello reader!!!  
Check back at the Weekend Wrap Up Party tonight where you can enter to win one of these fantastic machines. 
Here’s what it will come with: 

  • Stampmaker light unit
  • magnetic clamp
  • 5 x Large and 5 x Small
    stamp pacs
  • 2 x Emboss and 2 x Stencil pacs
  • acrylic block, small stamp
    border
  • rubber mat for emboss and stencil making
  • wash brush, post
    exposure tray
  • CD with the easy to use imagepac artwork modifying
    program and many exclusive Teresa Collins designs (ready to print)
  • 2 x
    sheets of negative film for inkjet printers
  • 2 x 4" x 3" sheets of
    Stampmaker Cling (for mounting stamp to acrylic block)
  • 8 pre printed
    samples of exclusive Teresa Collins designed artwork negatives plus
    written and video instructions

 And here’s Stampmaker video tutorial:
 

xoxo

PS — I am over at Sew Dang Cute today — sharing a Tube Top to Skirt refashion. Come on over and say hi!

PPSI can’t wait for tonight to see YOUR ideas!! I hope you will come link up to the Weekend Wrap Up Party — where I feature YOUR ideas!! The party starts at 6 pm MST.