Ruched Rosette Belt
Hi Tatertots and Jello Readers. My name is Jennifer and I have this little blog called A Happy Circus. I blog about life (with four kid’s), crafts, prettiness and stuff that makes me happy. Stop by for a visit. I’m so excited to be here today and wanted to thank Jen for having me. Today, I’ll be showing you how to make one of these trendy little leather belts. It’s actually quite simple, so stick around and give it a try.
First let’s gather our supplies. Here’s a list of what you’ll need.
* leather (look-alike: I used pleather) 7 inches.
* elastic 1.5 inches wide (length= your waist minus 3 inches)
* elastic 1.5 inches wide (length= your waist minus 3 inches)
* kit of snaps
* coordinating thread
* coordinating thread
First you will need to cut your strip of leather 3 inches in length. I left mine the full width of the fabric.
Next, you will fold each side 1/4 inch and sew as shown in the picture.
Once both sides of leather are sewn, you will fold each end over 1/2 inch and sew.
Now pin your elastic to the wrong side of the fabric just like in the photo. (you will only use one pin at the top) If you are right handed, you will stretch the elastic with your left hand bit by bit as far as you can while your right hand is behind the machine grabing the fabric and helping to pull it through. Just sit back and relax while you put the pedal to the medal.
When you are finished, you will end up with this.
Now you will attach the snaps as shown on the manufacturers instructions. (Don’t let this scare you. This was my first time and it was super easy. And looks kind of professional. After I finished, I was walking around the house looking for more stuff to put snaps on.)
And the belt could be finished now; however, I thought a rosette would be cute. (Plus it helps to cover up any mishaps.) First cut a shape out like this.
Next, cut out 1 1/2 inches of pleather by 16-18 inches long. Fold in half and sew as shown, then start to roll the strip up a bit and secure at the bottom with a few stitches.
Keep wrapping and stitching the bottom as you go. You’ll get in a groove and find what works best for you. I like pinching the fabric as I go and then tacking it to add dimension.
When you are finished the back will look like a hot mess.
So now you’ll want to take that funky little shape I had you cut out earlier and pinch it in the middle. Now stitch through and wrap the thread around to secure it. Then tie it in a knot and cut the string.
Ok – I WANT one of those belts! So cute!!! Thanks so much for sharing the tutorial with us!! Here’s a little button as my way of saying thank you! You really MUST check out Jennifer’s blog. It is chock full of deliciousness!
Have a Fabulous Friday!
XOXO
PS – The Weekend Wrap Up Party starts tonight at 8 pm (MST). Come show off YOUR ideas and be featured!